OBSBOT Meet SE Benutzerhandbuch Seite 5

Setting Up Meet SE
Placement Instructions
1. Placement on a Monitor
Please operate as shown in the figure:
1. Open the flexible base, set the magnetic on the monitor.
2. Making sure the foot on the flexible base is flush with the back of your monitor.
3. Place Meet SE on the magnetic mount.
2. Placement on a Tripod
OBSBOT Meet SE is equipped with a standard UNC 1/4-20 nut connector on the base for
mounting the camera to a stand/tripod.
Connect to the Computer
OBSBOT Meet SE is fully compatible with both Windows and Mac computers. To set it
up, connect the standard data cable to your laptop or desktop via a USB port. If needed,
use the included USB-C to USB-A adapter. The webcam will install automatically—please
wait a few seconds for the process to complete before accessing the device. Once
installed, you can start streaming on popular video call platforms like Zoom, Microsoft
Teams, Skype, or Google Meet with your Meet SE.
⚠
If the product is in use for an extended period, the bottom may heat up, which is
•
normal.
To avoid compatibility issues, always use the standard data cable to connect the
•
product to your computer.
5