Mixx StreamBuds Custom 1 Schnellstartanleitung Seite 2

[EN/US] QUICK START GUIDE
When first taking your earbuds out of the
packaging, please remove protective film
covering the charge points.
LET'S STAY CHARGED
Note: If your earbuds and charge case do not have any power when
you first unpack them, place the earbuds into the charge case and
plug the charge case into a USB port using the USB C cable [8]
provided.
The Earbuds
A voice prompt "Battery low" allows for 2 minutes play time before
the earbud(s) powers down stating "Battery low, power off". The
Earbuds LED Light [2] will flash WHITE once and will then switch off.
Charge the earbuds using the Portable Charging Case [5] .
While charging, each Earbud LED Light [2] will be WHITE and once
fully charged the LED Lights will turn off. Secure the earbuds by
closing the lid.
When the earbuds are placed inside the case and the lid is closed, the
charge indicator light (7) will turn WHITE for 4 seconds to indicate
charging and then turn off.
The Portable Charging Case
Always connect the case via the USB C port [6] , to a suitable USB
wall charger, computer USB port or a power bank using the USB C
8
charging cable (8) supplied. Plug the supplied cable into the USB
6
C port [6] on the charge case.
The charge light indicator (7) will blink RED, on and off, to show the
case is charging.
[EN] [US]
IMPORTANT!
2
7
7
[CA]
1
5
2
6
8