INSTRUCTIONS IN ENGLISH | TURF MOISTURE METER PRO
METER ASSEMBLY:
As pictured above: With the meter facing you, install the handle with Cap for Battery
Compartment (1) of Fig. 1 by handle turning clockwise until as tight as possible by hand. Do the
same for the handle with Cap for In-Handle Rod Storage (2) of Fig. 1. Once both handles are
attached, use a Hex Key Wrench (included) to tighten the locking screws. Store extra rods in
LEFT handle. Install (3) AA/LR6 Alkaline Batteries (included) in RIGHT handle.
USE OF PRODUCT:
Press the POWER button to turn on the meter. The display will show the battery level and the
serial number. Next, the Rod Length will appear, make sure this matches the rods installed (see
Changing Rods section). Then, the WET and DRY thresholds will be shown for easy reference. The
meter will then start reading sensor data and update the screen every second. If not used for 15
minutes, the meter will turn off automatically to save power. All meter settings and configurations
are managed through the SpotView™ Mobile App (see App Installation section).
SpotOn® Turf Moisture Meter Pro Item #42550
3