Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Read this first
Read through this installation guide carefully before
you install the product. Keep the installation guide for
future reference.
Legal considerations
Video and audio surveillance can be regulated by laws
that vary from country to country. Check the laws in
your local region before using this product for
surveillance purposes.
This product is subject to export control regulations,
and you should always comply with all applicable
national and international export or re-export control
regulations.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB
cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental or
consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more
of the patents listed at axis.com/patent and one or
more additional patents or pending patent
applications in the US and other countries.
Equipment modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no user-
serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable
regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are
registered trademarks of Axis AB in various
jurisdictions. All other trademarks are the property of
their respective owners.
Microsoft, Windows, the Windows logo, Microsoft
Edge, Internet Explorer, DirectX, BitLocker, Intel, Intel
Core, Celeron, Pentium, Xeon, Dell, Dell EMC,
PowerEdge, Optiplex, NVIDIA, NVIDIA Quadro,
DisplayPort, and Bonjour are registered trademarks of
the respective holders.
Regulatory information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC), on page 2.
•
Low Voltage Directive (LVD) 2014/35/EU. See
Safety, on page 3.
•
Restriction of Hazardous Substances (RoHS)
Directive 2011/65/EU and 2015/863, including
any amendments, updates or replacements.
See Disposal and recycling, on page 3.
A copy of the original declaration of conformity may
be obtained from Axis Communications AB. See
Contact information, on page 4.
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended
environment.
USA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful
interference, and
2.
this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested using an unshielded
network cable (UTP) and found to comply with the
limits for a Class A digital device, pursuant to part 15
of the FCC rules. This equipment has also been tested
using a shielded network cable (STP) and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.
Contact information
Axis Communications Inc
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000
2
Werbung
