JUNO JDA 5330 Montage- Und Gebrauchsanleitung Seite 9

Replacing the lamps
— Disconnect the hood from the electricity.
— Opening the Light Cover Support (fig. 6)
a. Remove the pull-out drawer
completely.
b. Push the B knobs inwards toward
each other (in the "Open" direction as
indicated on the plastic knob itself).
— Always replace burnt-out lamps with olive
shaped lamps max 40Watts-E14.
— Re-close the light cover support.
— Before calling for Repair Service because
the hood fails to light up, make sure the
lamp is well-inserted.
Cleaning
To clean the outside of the hood use a cloth
moistened with denatured alcohol or neutral
liquid detergents.
Never use products containing abrasive.
Wipe brushed stainless steel in the same
direction as the brushing to avoid scratching.
9