Meec tools 020715 Bedienungsanleitung Seite 9

tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
● Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
● Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
● Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
● Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
● Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
2.7 Battery tool use and care
● Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
● Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
2.8 To minimized noise and vibration
exposure
● Plan the work so that exposure to heavy vibrations is
spread over a longer period.
● To reduce noise and vibrations when in use, limit the
time the tool is in use, and use low-power/vibration
mode and suitable safety equipment.
● Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
● Check that the tool is in good condition.
● Only use accessories that are in good condition, and
suitable for the job.
● Keep a firm grip on the handles/grips.
2.9 Air pump safety warning
Warning! Explosion risk! Monitor the item to be
inflated.
● Monitor the pressure with a pressure gauge during
inflation to prevent over-inflation.
● Do not adjust the product to a higher output, explosion
risk.
● Do a check regularly that the product do not have
cracks, holes and other damages that can make it
dangerous to use.
● Make sure there is no blockage of the air openings on
the product during operation.
● Do not make a hole in the air pump.
● The product must be monitored during operation
when the nozzle is connected to the item to be
inflated.
● Do not use an air pump or nozzle that leaks, or is not
working correctly.
● Do not hold the product by the nozzle.
● Do not use the product to help with breathing.
● Do not point the airflow at people or animals.
● Do not blow dust or debris at yourself or at other
people because it can cause injuries. Wear a dust filter
mask if the work produces a lot of dust.
● Do not use the product to spray chemicals, there is
risk of damage to lungs as a result of inhaling harmful
fumes.
2.10 Safety instructions for operation
● Read and obey the warning instructions before
operation.
● Do not use the product if you are tired, ill, or
intoxicated. This will decrease your vision, alertness,
coordination and judgement.
● Do not let children or persons who do not know the
product to use it.
● Do not use the product if it is damaged.
● Do not make changes to the product.
● Use the product only for its specified function.
● Wear ear protectors when you use the product.
Exposure to noise can cause hearing loss.
EN
SV
NO
PL
DE
FI
FR
NL
9