Table of contents
1 Introduction
1.1 The product .......................................................................7
1.2 Dedicated use ..................................................................7
1.3 Symbols ..............................................................................7
1.4 Product overview ...........................................................7
2 Safety
2.1 Safety definitions ...........................................................7
2.2 General power tool safety warnings ....................7
2.3 Work area safety .............................................................8
2.4 Electrical safety ...............................................................8
2.5 Personal safety ................................................................8
2.6 Power tool use and care .............................................8
2.7 Battery tool use and care ........................................9
2.8 To minimized noise and vibration exposure .....9
2.9 Air pump safety warning ............................................9
2.10 Safety instructions for operation ..........................9
3 Operation
3.1 To attach and remove the battery ........................10
3.2 To attach and use the different nozzles ............10
3.3 To operate the product ..............................................10
4 Storage
5 Maintenance
6 Discard
7 Servicing
8 Technical data
1
Introduction
1.1
The product
7
The product is an air pump with 2 nozzles that is a part of
the Meec Tools Multiseries 18 V. The battery and battery
charger are not included.
1.2
Dedicated use
The product can be used for large inflation tasks or as a
7
blower. Only for domestic use.
1.3
Symbols
10
1.4 Product overview
Figure 1
1.
Inflation port
2.
Deflation port
11
3.
Holder for the narrow nozzle
11
4.
Battery port
5.
Trigger
11
6.
Narrow nozzle
11
7.
High volume nozzle
11
2
Safety
2.1
Safety definitions
Warning! If you do not obey these instructions,
there is a risk of death or injury.
Caution! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
Note! Information that is necessary in a given situation.
2.2 General power tool safety
warnings
Warning! If you do not obey these instructions,
there is a risk of death or injury.
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
EN
SV
NO
PL
DE
FI
FR
NL
7