Herunterladen Diese Seite drucken

WE-EF MRY224 Montage- Und Wartungshinweise

Pollerleuchten
Sicherheit
Der Hersteller übernimmt keine Haftung für Schäden, die
durch unsachgemäßen Einsatz oder Montage entstehen.
Werden nachträglich Änderungen an Leuchten und/oder
Zubehör vorgenommen, so gilt derjenige als Hersteller,
der diese Änderungen vornimmt.
WE-EF LEUCHTEN Germany
Tel +49 5194 909 0
info.germany@we-ef.com
WE-EF LUMIERE France
Tel +33 4 74 99 14 44
we-ef.com
info.france@we-ef.com
Safety Notice
The manufacturer is discharged from liability when damage
is caused by improper use or installation.
If any luminaire and/or accessory is subsequently modified,
the persons responsible for the modification shall be con-
sidered as manufacturer.
WE-EF LIGHTING Thailand
WE-EF LIGHTING Australia
Tel +66 2 738 9610
Tel +61 3 8587 0444
info.asiapacific@we-ef.com
info.australia@we-ef.com
WE-EF LIGHTING USA
WE-EF SWITZERLAND Schweiz
Tel +1 724 742 0030
Tel +41 22 752 49 94
info.usa@we-ef.com
info.switzerland@we-ef.com
MRY224_260123 / 006-1241
Technische Änderungen vorbehalten.
Technical specifications are subject to change.
© WE-EF 2025
WE-EF LEUCHTEN
Montage- und
Wartungshinweise für
Pollerleuchten
MRY224
Installation and
Maintenance Instructions for
Bollards
MRY224
loading

Inhaltszusammenfassung für WE-EF MRY224

  • Seite 1 Montage- und Wartungshinweise für Pollerleuchten MRY224 Installation and Maintenance Instructions for Bollards MRY224 WE-EF LEUCHTEN Germany WE-EF LIGHTING Thailand WE-EF LIGHTING Australia Tel +49 5194 909 0 Tel +66 2 738 9610 Tel +61 3 8587 0444 info.asiapacific@we-ef.com info.germany@we-ef.com info.australia@we-ef.com...
  • Seite 2 Für die Entsorgung der LEDs sind die zur Zeit Protect our environment: Discard used LEDs in gültigen Umweltgesetze zu be achten. compliance with the most recent environmental Benötigtes Werkzeug Tools required legislation. – Innensechsrund T25 (von WE-EF bereitgestellt) – Torx 25 (provided by WE-EF)
  • Seite 3 5) Check that rating shown on luminaire label und Frequenz mit den Daten auf dem conforms with mains electrical supply. Leistungsschild. 04/20 IP66/67 (Beispiel) (example) MRY224 LED 220-240V / 50 Hz  185-XXXX SOE XXXXXXX LED 3000K 15W item no. XXX...
  • Seite 4 9) Schraube A mit Innensechsrund T25 anziehen 9) Tighten screw A with Torx T25 tool (von WE-EF bereitgestellt). (provided by WE-EF). 7) Hülse B mit dem Leuchtenkopf über das Stand- 7) Place sleeve B including luminaire head over...

Diese Anleitung auch für:

Mry224 led