Factory Settings; Supported Formats - Overmax Multipic 4.5 Bedienungsanleitung

Depending on the device, the process of connecting via "Miracast" may vary.
Android devices:
or screen connection. Then turn on the search for active wireless screens. Then connect
to the selected device.
Apple iOS devices:
to transmit an image are connected to the same Wi-Fi network. Go to the control panel
and select duplicate screen, then connect to the selected device.
LOUDSPEAKER FUNCTION
To use the device as a loudspeaker, press the switch on the remote control (1, fig. B) and
then select the sound mode (fig. 8).

FACTORY SETTINGS

To restore the factory settings, go to "Settings" > "System settings" > "Restore factory
settings".

SUPPORTED FORMATS

Image formats: BMP, PNG, JPG
Video formats: AVI, MPG, MP4, RMVB, FIV, MOV, MKV, 3GP, VOB
Audio formats: WAV, WMA, AAC, AC3, MP3, FLAC, M4A
Text formats: TXT (UTF8, ANSI, UTF8-BOM)
Note:
this device does not support Dolby encoded audio due to copyright protection.
CLEANING
•
Always unplug the power cord and switch off the device before cleaning.
•
Clean the housing regularly with a damp cloth.
•
Use an eyeglass tissue or soft cloth to clean the projector lens to avoid scratches.
•
Regularly clean the projector ventilation and speakers with a soft brush. Otherwise,
look for settings described as: Miracast, then duplicating the screen
Make sure that the projector and the device from which you want
EN