Firmware-Version; Mac Address - Z21 Pro Link Bedienungsanleitung

Model Railway Control Unit
Hardware Type
With this input, the hardware type of your Z21 pro LINK is displayed.
Firmware Version
With this input, the firmware version of your Z21 pro LINK is displayed.

MAC Address

With this input, the MAC address of your Z21 pro LINK is displayed.
Brightness
With this selection field, you can determine the brightness of the display.
Selection range: 10, 20, 30, ..., 100 percent.
Factory setting: 90.
Dimming Time
With this selection field, you can determine the time period until the display is dimmed to half the value of the set brightness.
Selection range: "off", 1, 2, 3, ..., 60 seconds.
Factory setting: 20.
Power Save
With this selection field, you can determine the time period until the display is fully darkened for energy-saving purposes, to avoid the
"burn-in effect" and to extend the lifetime.
Selection range: "off", 1, 2, 3, ..., 60 minutes.
Factory setting: 10.
Left-Handed
With this option, you can determine whether the display and the key assignment should be rotated by 180 degrees in order to permit
more convenient operation of the Z21 pro LINK for left-handed people.
Factory setting: "off".
Factory Settings
Restore
With this function, you initiate reinstatement of the factory settings, whereby both the wireless and the system settings are reset.
28