Display And Menu Structure; Querying The Status Of The Terminal Device; Changing The Status Of The Terminal Device - Z21 Pro Link Bedienungsanleitung

Model Railway Control Unit

6. Display and menu structure

The Z21 pro LINK permits you to query the status of a connected terminal device and to change its settings. The
menus used for this purpose are "dynamic" menus, which are generated individually depending on the connected device.
Settings
Both the and
Wireless
device, so that they can confi gure the wireless network via the USB port even without a terminal device using an alternative power
supply, and also change the system settings.
The status and settings menu used in the following description was generated for a Z21 single BOOSTER connected to the Z21 pro
LINK. In the schematic representation, the black area represents the visible text section on the display. The grey text to the right of the
display is made visible through automatic horizontal scrolling; the grey text below the display becomes visible through manual vertical
scrolling.

6.1 Querying the status of the terminal device

6.2 Changing the status of the terminal device

24
menus are "static" menus which can be displayed independently from the connected terminal
System
Select the
Status
order to get into the status menu.
Use the or
Note: Because this menu is generated dynamically with the runtime, the representation
of the status data varies dependent on the connected zLink-capable device.
Select the
Settings
order to get into the status menu.
subitem in the main menu and confi rm your selection with the
key in order to scroll up or down in the displayed text.
subitem in the main menu and confi rm your selection with the
and
Status
key in
key in