Channel List - Samsung LE32B579 Bedienungsanleitung

Cable Search Option (depending on the country)
❑
Sets additional search options such as the frequency and symbol rate for cable network searches.
● Freq.Start (Frequency Start): Set the start frequency (Differs in each country)
Freq.Stop (Frequency Stop): Set the stop frequency (Differs in each country)
●
● Modulation: Displays available modulation values.
● Symbol Rate: Displays available symbol rates.
Full Guide / Mini Guide
❑
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the
O
descriptions.)
Full Guide
■
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which
may be scrolled forwards or backwards in time.
Mini Guide
■
The information of each programme is displayed by each line on the current channel Mini Guide screen from the current
programme onwards according to the programme starting time order.
Default Guide → Full Guide / Mini Guide
❑
You can decide whether to display either the Full Guide or the Mini Guide when the GUIDE button on the remote control is
pressed.

Channel List

❑
For detailed procedures on using the Channel List, refer to the 'Managing Channels' instructions.
You can select these options by simply pressing the CH LIST button on the remote control.
O
Fine Tune
❑
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk '*' on the right-hand side of the channel number in the
N
channel banner.
To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTERE button.
N
Only Analogue TV channels can be fine tuned.
N
English - 12