Manual Store
❑
Scans for a channel manually and stores it in the TV's memory.
N
If a channel is locked using the Child Lock function, the PIN input window appears.
N
When the Antenna was set to Air or Cable
Digital Channel
■
Manual store for digital channels.
Digital Channel is only available in DTV mode.
N
●
When selecting Antenna → Air
Channel: Set the Channel number using the ▲, ▼ or numeric (0~9) buttons.
Frequency: Set the frequency using the umeric buttons.
Bandwidth: Set the bandwidth using the ▲, ▼ or numeric (0~9) buttons.
When it has finished, channels are updated in the channel list.
N
●
When selecting Antenna → Cable
Frequency: Sets the frequency using the numeric buttons.
Modulation: Sets modulation using ▲, ▼ buttons.
Symbol Rate: Sets the symbol rate using the numeric buttons.
When it has finished, channels are updated in the channel list.
N
Analogue Channel
■
Manual store for analogue channel.
●
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
●
Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.
●
Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.
●
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or
S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
N
If there is abnormal sound or no sound, reselect the sound standard required.
N
●
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
●
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button.
Channel mode
N
P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
When the Antenna was set to Satellite
Satellite / Index / Scan Mode / Frequency / Symbol Rate / Polarity / Network Search
■
Set the menus needed for manual store of the satellite broadcasting.
When Setting is completed, move to Search and press the ENTERE button. Channel scan is started.
Signal Quality
■
Display the current status of broadcasting signal.
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.
N
English - 11