EN
EN - USER MANUAL
Digital car air compressor 04376 / YD-310
PRODUCT DESCRIPTION
1. Preset pressure
2. LED light switch
3. Power switch
4. Mode switch
5. Air outlet
6. LED light
7. Mode
8. Real pressure
9. Pressure + switch
10. Pressure - switch
11. Heat dissipation hole
12. Power cord
13. 4 adapters
14. Air hose
PRODUCT CHARACTERISTICS
1. This device is only suitable for bicycle, motorcycle and
car tires as well as small inflatable toys,sporting goods
and beach goods.It can not be used for large and
heavy vehicle tires,such as trucks,large trucks,contain-
er trucks, etc.
2. Lighting function: with white LED lights, can be used as
outdoor lighting function.
3. Air pressure detection function: digital gauge, can be
used as air pressure detection.
4. Ultra-high pressure output :150PSI, can be applied to
all types of bicycle tire pressure range.
SAFETY PRECAUTIONS
1. When using for the first time, please carefully check
whether the machine and accessories are in good con-
dition.
2. Before inflating, please confirm whether the mode and
the inflater match before starting the inflating.
3. Children are prohibited from using it to avoid neces-
sary harm.
4. Do not use in flammable and explosive environments.
5. Please read the instruction manual carefully, use the
original accessories, can not be replaced by other ac-
cessories.
6. The product will be hot when inflating, please be care-
ful when disassembling the air hose.
7. If there is an abnormal sound or the temperature is
too high during work, please shut down immediately.
8. When used for car tire inflation,it must be rested for
15 minutes after 10 minutes of continuous use, so that
the body can be used after a little cooling,which can
extend the life of the motor.
9. This device is limited to DC12V, 15A power supply with-
in the use, can not exceed.
Note: This machine is only powered by DC 12 V cigarette
lighter, no battery can not charged by adaptor
INSTALLATION AND USE
1. Tighten the air hose
2. Clamp the air nozzle
3. After selecting the mode, set the tire pressure value.
Press the power switch to start pumping
4. The device will stop when reaching the preset value and
complete the pumping.
Power switch
Start the automobile.Plug the power cord into the cigarette
outlet,the screen lights up and turn on.After select the
mode, short press the switch to start,then click again to
stop(when the pressure reaches preset pressure it will
stop working automatically).Remove the cord to turn off.
Mode switch
The compressor has 5 modes to choose: car, motorcycle,
bicycle,ball and custom.Press M to switch modes. For each
mode, there is a different pressure default.
P/N: 04376 / YD-310
1