CPVan CP2W Bedienungsanleitung Seite 6

3. Create an account in Smart Life/ Tuya Smart
a.Select the registration country
b.Enter an e-mail address to receive verification code
c.Enter verification code
d.Create your unique password( No more than 20 characters)
Add Your Hub
1. Make sure the Bluetooth is on and wifi network is connected
2. Power on via the included Type-C cable or inserting 3 AA batteries,then the device
will turn on automatically (You will hear 2 beeps.).
Note: Those 3 AA batteries are backup power. It can last about 8 hours. So you'd better
to use Type-C cable.
3. Long press these 2 buttons as below at the same time, then you will hear 3 beeps
and see the red light blinking quickly which means the device in pairing mode.
Note: Long press these 2 buttons again to delete the hub from the APP(No notification
on your phone anymore). This won't disconnect the hub and the accessories.
4. Open Smart Life or Tuya Smart.
You will have 2 options to add device:
a.Directly click Add Device button on the middle of the screen.
b.Click "+" button on the top of the right,then click Add Device button
04