CPVan CP2W Bedienungsanleitung Seite 12

a.Long press【
b.Randomly press a button on the remote control,will will hear 2 beeps from the hub
and the red light remains on.(This means you pair them successfully.) Repeat step b on
the rest remotes to add more remotes;
c.Randomly press a button on the hub to turn off the red light;
d.Manipulate the remotes to see if they work.
3. Delete the remotes:
a.Long press【
b.Then long press【
4. Pair the door/window sensors(up to 24 sensors):
a.Long press【
b.Separate the door/window sensor,you will hear 2 beeps from the hub;
c.Randomly press a button on the hub to turn off the red light;
d.Separate the door/window sensor to check if it works.
5.Delete the door/window sensors:
a.Long press【
b.Then long press【
6. Set the hub
Press【 】on the hub to set the hub to Arm/Home/Disarm mode.
a.Arm: You will hear 1 beep
b.Home: You will hear 3 beeps
c.Disarm: You will hear 2 beeps
7. Set the ring type
Press【 】to choose the ring alarm you like(5 types)
8. Set the volume
Press【 】to choose the volume you like(When it's max,you will hear 2 beeps)
9. Turn on/off the hub
a.Turn on: Long press【
b.Turn off: Long press【
】,you will hear lasting beep and the red light remains on;
】and see the red light on;
】again and you will hear 5 beeps.
】,you will hear lasting beep and the red light remains on;
】and see the red light on;
】again and you will hear 5 beeps.
】,you will hear 1 beep and see red and blue light flash
】,you will hear 1 beep and see red light flash
10