Samsung HW-H600 Bedienungsanleitung Seite 16

FUNCTIONS
+ Bluetooth POWER on (Bluetooth
POWER)
When the Bluetooth Power On function is on and the
SoundStand is turned off, if a previously paired Bluetooth
device tries to pair with the SoundStand, the
SoundStand turns on automatically.
1. Press the Bluetooth POWER button on the remote
control.
2. Bluetooth POWER on appears on the SoundStand's
display.
● Available only if the SoundStand is listed
among the Bluetooth device's paired devices.
(The Bluetooth device and the SoundStand
must have been previously paired at least
once.)
● SoundStand will appear in the Bluetooth
device's searched devices list only when the
SoundStand is displaying [BT READY].
● In the TV SoundConnect mode, the
SoundStand cannot be paired to another
Bluetooth device.
+ To disconnect the Bluetooth
device from the SoundStand
You can disconnect the Bluetooth device from the
SoundStand. For instructions, see the Bluetooth device's
user manual.
● The SoundStand will be disconnected.
● When the SoundStand is disconnected from the
Bluetooth device, the SoundStand will display BT
DISCONNECTED on the front display.
+ To disconnect the SoundStand
from the Bluetooth device
Press the SOURCE button on the remote control or
the ( ) button on the product's top panel to switch
from BT to another mode or turn off the SoundStand.
● The connected Bluetooth device will wait a certain
amount of time for a response from the SoundStand
before terminating the connection. (Disconnection
time may differ, depending on the Bluetooth device)
● In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the SoundStand and the Bluetooth device
exceeds 5m.
● The SoundStand automatically turns off after
25 minutes in the Ready state.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect easily with each other
using a short wireless connection.
● A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the SoundStand.
- It is subject to electrical variation from
obstructions caused by a wall, corner, or office
partition.
- It is exposed to electrical interference from same
frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
● Pair the SoundStand with the Bluetooth device while
they are close together.
● The further the distance between the SoundStand
and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
● The Bluetooth connection only works when it is close
to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within
range, the sound quality may be degraded by
obstacles such as walls or doors.
● This wireless device may cause electric interference
during its operation.
16