HOMCOM 800-202V70 Bedienungsanleitung Seite 6

EN
AFTER USE
1. Turn back the Timer knob to"OFF"
2. Turn the Temperature knob to "OFF"
3. Unplug the appliance from the outlet.
4. Wait until the oven is completely cool before any cleaning or maintenance
NOTE: when you remove the foods from the hot oven, always wear protective
insulated gloves or use other handles.
MAINTENANCE AND CLEANING
1.Unplug the appliance and allow it to cool before cleaning.
2. Do not immerse the appliance in water.All surfaces can be cleaned with a damp
cloth.
3. lf stains still appear, it is recommended to use detergent and please make sure
clean with damp cloth to remove detergent.
4. Do not use abrasive cleaners or sharp utensils to clean the appliance.
5. Wait until the oven is completely cool, then dry the walls of the inner cavity with a
dry towel to dry out any residual moisture so that it stays dry.
Note: lt is important that you clean the entire appliance after each use to prevent an
accumulation of grease and avoid unpleasant odors.
Tips:
Before use, please wipe the surface of the heating tube, and thenopen the door of the
item, preheating for 30 minutes.Please do not touch the item during the preheating
process to avoid burns!
It is normal for the item to interrupt heating for 3-4 minutes when the temperature
reaches the set temperature. When the temperature reaches the set temperature, the
thermostat will interrupt the heating. When the temperature is lower than the set
temperature, the thermostat will start heating again.
The item with ±30°C temperature difference, it is normal.
Reference for different ambient temperature rang ranges:
1. In 0°C environment use: should be set 20-25°C lower than the temperature you
want.
2. In 25°C environment use: the internal temperature of the oven is the set
temperature.
3. In 35°C environment use: the temperature should be set 20-25°C higher than the
temperature you want.
6