Samsung PS50B650 Bedienungsanleitung Seite 32

If Security Key is not set
„
is NONE, you can select PBC, PIN, None Security. None Security is capable of
connecting to AP directly without using WPS function.
Process of PBC, PIN is same as above. Refer to if Security Key is already set.
N
Try again if connecting operation doesn't work.
N
Ad-hoc : You can connect to a mobile device without an access point through
„
the 'Samsung Wireless LAN Adapter' by using a peer to peer network.
• How to connect to new Ad-hoc
1. Choose Select a network, then a device list is displayed.
2. While in the device list, press the Blue button on the remote or select Ad-hoc.
The message The existing network system may have limited functionality. Do you want to change the network
N
connection? is displayed.
3. Input the generated Network Name(SSID) and Security Key into the device you want to connect.
• How to connect an existing Ad-hoc device
1. Choose Select a network, the device list is displayed.
2. Select the device you want in the Device list.
3. If security key was applied, input the security key again.
If network doesn't operate normally, please check the
N
If the Security Key is incorrect, it may be the reason for the malfunction.
Wireless Network Setup - Auto
„
If you want to connect AP, AP should support DHCP.
Only devices which support Ad-hoc mode can be connected without DHCP.
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Auto.
The Internet Protocol is set automatically.
N
4. Select a network through Select a network.
5. Select Network Test to check the network connectivity.
Wireless Network Setup - Manual
„
To connect the network wirelessly using a static IP address, you must set up the Internet Protocol (IP). (See page 29)
For more detailed information of static IP address, refer to the user manual of your wireless IP sharer.
N
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Manual.
4. Set up IP Address, Subnet Mask, Gateway and DNS Server.
Press the number buttons on the remote control when you set the Network manually.
N
5. Select a network through Select a network.
6. Select Network Test to check the network connectivity.
: When the security setting of AP that supports WPS
English - 32
Network Name(SSID) and Security Key again.
Wireless Network Setup
Select a network
AP_1
PBC
AP_2
PIN
Search AP_3
Security Key
Ad-hoc AP_4
Move Enter
n E
The existing network system may have limited
functionality. Do you want to change the network
connection?
Yes No
3/9
Return
R