JVC JLIP GV-CB3E Bedienungsanleitung Seite 12

12
EN
Image data flow (When Using JLIP Video Capture Software)
Video source
unit
* If you use a video source unit which outputs a digital signal through the JLIP connector, you
can store images in the DVF (DV still image) format.
When storing full image data on a 2HD disk,
• An image saved in the bitmap data format can be stored on one disk.
• About 28 images saved in the JPEG video compression format can be stored on one disk.
This is the case when using floppy disks formatted for 1.44 MB.
NOTE:
•The index image is displayed in the image display box.
•Each time the image display box is double-clicked, the full image data (768 x 552 pixels) is
displayed only after full image data transfer is finished.
Video signal
(Image stored in video memory)
Full image data
(with a resolution of
768 x 552 pixels)
(3 types of video data)
•DVF (DV still image)
data: Approx. 120
kB*
•Bitmap data:
Approx. 1.3 MB
•JPEG video
compression data:
Approx. 50 kB
(video data are stored on a hard disk or the like)
VIDEO CAPTURE
GV-CB3
Index image data
(with a resolution of
80 x 60 pixels)
PC