Operation - Marechal Electric Rettbox S Bedienungsanleitung

►WIRING AND INSTALLATION
CONNECTOR
• Pass the cable or flexible conduit through the handle.
Respect the marking of the terminals.
• If any, connect the compressed air hose (OD 6 mm);
• Adjust the length of the cable/conduit to prevent the
connector from falling to the ground when ejected.

►OPERATION

• Rotate the cover and keep it open;
• Insert the portable socket-outlet and push it into the inlet
until it latches. The voltage indicator lights on and the vehicle
is powered;
• When the engine starts, the connector is ejected and the
cover closes.
• To disconnect the connector manually, an eject button is
accessible on the front.
IS 43 [RETTBOX®S] Rev D.0 - 2022-02 14/50
,