Werbung
To disable gesture control
The E50 is shipped with gesture control enabled. In some installations gesture control
may not be required. In order to enable/disable gesture control:
1. Make sure that the E50 is in standby mode. Press and hold the standby and source
keys at the same time until the white and green LEDs are illuminated.
DO NOT PRESS ANY BUTTONS. WAIT 2 SECONDS.
2. To disable gestures press the volume down key to extinguish all the white LEDs.
3. To enable gestures press the volume up key to light all the white LEDs.
4. Press the standby key to save the current setting.
13
Werbung
