Werbung
Operating Instructions
Pairing/connecting a Bluetooth music source
1. The E50 is always in pairing mode. Navigate to the Bluetooth devices list on your
phone or other Bluetooth transmitter device. Select Systemline E50(_n) from the
device list. If the phone has not previously been paired a Bluetooth pairing request
will be displayed on the phone. On the E50 the blue LED will flash.
2. Press and hold the source key on the E50 until the blue LED stops flashing.
3. Press pair on the phone. The unit will now pair and connect. The E50 will wake up,
the blue LED will be illuminated and the default volume level will be displayed.
4. If the phone has previously been paired it will connect straight away, without the
need for steps 2 and 3.
Listening to a Bluetooth music source
1. If not already done, pair or connect with the Bluetooth device (see above).
2. Navigate to the media player on your phone or other Bluetooth transmitter device
and press play. The Bluetooth source will be selected and music will play through
the E50.
3. Check that the blue source LED is illuminated, if not press the source key on the E50.
The LED will turn from green to blue and the default volume level will be displayed.
To skip track forwards in Bluetooth mode
1. Use your four outstretched finger tips to flick from left of the volume down key to
right of the volume up key in a single consistent sweeping motion from left to right
at a distance of up to 70mm from the front panel. Do not actually touch the front
panel. The track will skip forward.
Skip track forwards using hand gesture
6
Werbung
