Werbung
To put the E50 into standby
1. Press the standby key. The E50 will turn off and the red LED will illuminate. In this
mode the amplifier is turned off and the Bluetooth connection is dropped. The E50
is still in Bluetooth pairing mode and will wake instantly when the standby key is
pressed or when paired.
To put the E50 into deep standby
1. Press and hold the standby key until the red LED is extinguished. In this mode the
amplifier and the Bluetooth pairing are turned off and the unit will consume only
0.5W of power.
2. When the standby key is pressed the unit will reboot to standby mode as above.
10
Werbung
