Mains Adapter; Outdoor Unit - BASETech 1437197 Bedienungsanleitung

b) Mains adapter
• The mains adapter is constructed pursuant to protection class II.
• The mains socket for the mains adapter must be close to the device and easily
accessible.
• Do not pull the mains adapter from the mains socket by pulling the cable.
• If the mains adapter is damaged, do not touch it. Danger to life from electric shock!
First deactivate all sides of the mains socket to which the mains adapter is con-
nected (e.g. switch off the respective fuse or turn out the fuse. Then deactivate
the associated FI protection switch). Only then pull the mains unit from the mains
socket and take the product to a specialist workshop.
• The mains adapter is only suitable for dry, closed indoor rooms; it must not be-
come damp or wet.
There is danger to life from electric shock!
• Protect the cables of the mains adapter from sharp edges at installation, do not
crush the cable.
c) Outdoor unit
• The outdoor unit is suitable for indoor and outdoor use. However, it must never be
operated in or under water; it would be destroyed by this.
Install the outdoor unit outdoors under a protruding roof (e.g. an awning).
• Ensure that the connection cable is not crushed, bent or damaged by sharp edges.
• Install the outdoor unit so that the installed camera does not point right at bright
light sources (e.g. the sun or spotlights). This will not only cause an overmodu-
lated and useless image, but also may damage the image sensor it permanently
exposed.
• Before installation of the outdoor unit, observe any possible provisions on whether
operation of the camera or its alignment with a specific area is permitted.
37