Technical Data - Rusta Narvik Gebrauchsanweisung

ENG
TROUBLESHOOTING
Problem
No light is being
emitted from
the log bed.
No heat is
being emitted
from the
electric stove.
The electric
stove does
not work or
the fan does
not operate.

TECHNICAL DATA

Voltage
Output
Light source
Dimensions
6
All manuals and user guides at all-guides.com
Cause Solution
Stove is not Check that the electric stove is plugged in
plugged in or and switched on at the mains power supply,
flame effect is not and that the flame effect switch is turned on.
switched on.
There may be a Check the mains power supply by plugging
problem in a working product. If the mains power
with the power supply is functional and the cord or plug of
supply to the electric stove is suspected to be faulty,
the electric stove. have it checked by a qualified electrician.
The thermal Follow the instructions in the section
cut-out entitled 'Thermal Cut-out Device'.
device has ac-
tivated.
The heat setting Check that the fan switch has been turned
switches on and that the required heat setting
have not been switch has been selected.
turned on.
The fuse may Unplug the electric stove from the mains
have blown. power supply and check your fuse box.
The thermal Follow the instructions in the section
cut-out 'Thermal Cut-out Device'.
device has ac-
tivated.
220–240V~50Hz
900W–1800W
LED
42.5 x 30 x 53.5 cm