Power Dynamics MSLP Serie Bedienungsanleitung Seite 23

To skip track back in Bluetooth mode
1. Use your four outstretched finger tips to flick from right of the volume up key to left
of the volume down key in a single consistent sweeping motion from right to left
at a distance of up to 70mm from the front panel. Do not actually touch the front
panel. The track will skip back.
To pause/play in Bluetooth mode
1. Touch the centre of the touch panel where the volume LEDs are positioned to
pause playback while in Bluetooth mode.
2. Touch the centre of the touch panel again to resume playback.
Listening to an analogue music source
1. Make sure that a compatible analogue music source is connected to either the
front or rear input jack (not both) using a 3.5mm stereo audio jack cable.
Do not connect audio sources to the front and rear line inputs at the same time.
2. Check that the green source LED is illuminated. If not, press the source key.
The green LED will be illuminated and the default turn on volume level will be
indicated.
Skip track back using hand gesture
7