Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPECIAL FEATURES
Team sync： When the sync condition is met, each taillight resets to the
starting point of flashing frequency and flashes at the same frequency.
Auto-sleep/wake up： After stationary for ���s (can be modified in the
iGPSPORT APP) in the power-on state, it will automatically enter sleep
mode, with the main light and indicator light turning off. It will be
awakened when it detects motion or a button is pressed, and it will restore
the light mode before entering sleep mode.
Sync power off： The device can power off synchronously when connected
to a bike computer.
Smart light sensing： When connected to the bike computer, the taillight is
turned on or off (adjusting light brightness) based on the light sensing value
of the bike computer.
Accurate battery life prediction： The device estimates the available
battery life based on the current mode and battery level, and displays it on
the computer/APP.
Auto power on/off： When connected to the bike computer, the taillight is
turned on/off based on the status of the bike computer.
Brake sensing： When the taillight detects a brake, it activates the sharp
flash mode to alert rear vehicles.
Light mode on/off： You can enable or disable the light mode in the
iGPSPORT APP. When disabled, the mode cannot be switched to through
the APP or the button.
Custom mode： The parameters such as brightness and lighting mode for
the Custom Mode can be edited in the iGPSPORT APP.
Note:
*Sync power off, smart light sensing and auto power on/off are disabled by
default and need to be enabled in the iGPSPORT APP or the bike computer.
*Sync power off is supported by certain models of the bike computer.
Please consult customer service for specific models.
OPERATING INSTRUCTIONS
.Please select a suitable place to install the light to ensure riding safety;
.Please install the device at an appropriate height on the seat post or saddle
to ensure the best detection range.
.The mounting base should be installed vertically and it is compatible with
most types and angles of seat posts.
.Please install the device correctly, ensuring it faces the rear and is vertical to
the road surface.
.Please ensure there are no obstructions in front of the light.
�
Werbung
