Maintenance; Manufacturer's Warranty; Spare Parts Lists - Roller Mini-Ortem S Betriebsanleitung

eng

4. Maintenance

4.1. Maintenance
WARNING
Pull out the mains plug before maintenance work!
Clean the electric pipe cleaning machine and the pipe cleaning spiral regularly
especially when they have not been in use for a long time. Clean plastic parts
(e.g. housing) only with machine cleaner or a mild soap and a damp cloth. Do
not use household cleaners. These often contain chemicals which can damage
the plastic parts. Never use petrol, turpentine, thinner or similar products for
cleaning.
5. Faults
ROLLER'S Mini-Ortem S
5.1. Fault: Power tool does not start.
Cause:
● Worn carbon brushes.
● Mains lead defective.
● Electric pipe cleaning machine defective.
5.2. Fault: No feed of the pipe cleaning spiral.
Cause:
● Adjusting wheel (11) was not engaged.
● Pipe cleaning spiral stuck in the pipe or in a pipe blockage.
● Pipe cleaning spiral is not mounted in the spiral drum (10) in clockwise
direction.
● Electric pipe cleaning machine defective.
6. Disposal
The ROLLER'S Mini-Ortem S drive unit may not be thrown in the domestic
waste at the end of use. It must be disposed of properly by law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the
first user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which ROLLER is not responsible, shall be excluded from the
warranty
Services under the warranty may only be provided by customer service stations
authorized for this purpose by ROLLER. Complaints will only be accepted if
the product is returned to a customer service station authorized by ROLLER
without prior interference in an unassembled condition. Replaced products and
parts shall become the property of ROLLER.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the
seller under the warranty terms, shall not be affected. This manufacturer's
warranty only applies for new products which are purchased in the European
Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations
Convention on Contracts for the International Sales of Goods (CISG).

8. Spare parts lists

For spare parts lists, see www.albert-roller.de → Downloads → Parts lists.
Make sure that liquids never get onto or inside the electric pipe cleaning machine.
Never immerse the electric pipe cleaning machine in liquid.
4.2. Inspection/Repair
ROLLER'S Mini-Ortem S
WARNING
Pull out the mains plug before maintenance and repair work! This work
may only be performed by qualified personnel.
The gear runs in a life­long grease filling and therefore needs no lubrication.
The drive machine motor has carbon brushes. These are subject to wear and
must therefore by checked and changed by qualified specialists or an author-
ised ROLLER'S customer service workshop from time to time.
Remedy:
● Have the carbon brushes changed by qualified personnel or an authorised
ROLLER customer service workshop.
● Have the connecting cable replaced by qualified technicians or an authorised
ROLLER contract customer service workshop.
● Have the pipe cleaning machine inspected/repaired by an authorised ROLLER
customer service workshop.
Remedy:
● Engage adjusting wheel (11), see 3.1. Operation ROLLER'S Mini-Ortem.
● Set the direction of rotation switch (3) to the arrow in the direction of the switch
handle (2). Turn the side handle with thrust control (Fig.1 (1)) to the left. Press
the safety inching switch (4) lightly so that the spiral drum (10) turns, then
increase the speed slowly as required.
● Remove pipe cleaning spiral and re-mount, see 2.2.
● Have the pipe cleaning machine inspected/repaired by an authorised ROLLER
customer service workshop.
eng
9