Zibro Aida Installationshandbuch Seite 60

Picture 11
4
60
install_Aida_'10.indd 60
2. Clean the chamber using a soft brush and a vacuum cleaner.
Make sure the stove is disconnected from electrical power supply.
3. Remove the bolt from the protection plate, see picture 9.
4. Clean the area behind the protection plate with a soft brush and a vacuum cleaner.
5. Replace the protection plate.
6. Replace the fume chamber cover. Verify the seal between cover and stove chamber
is still in good condition.
Picture 8
d.3.4 taking off the maintenance cover
For maintenance purposes removal of the maintenance cover is needed.
Make sure the stove is disconnected from electrical power supply.
Remove the 2 screws, see picture 10.
The maintenance cover can now be taken off.
Picture10
d.3.5 cleaning the room air recirculation fan
The room air recirculation fan needs to be cleaned once per year by a by Zibro autho-
rized technician.
1. Remove the maintenance cover. See chapter D. 3.4.
Make sure the stove is disconnected from electrical power supply.
2. Clean the outside around the room air circulation fan (see picture 11) with a vacuum
cleaner.
Picture 9
11-5-10 13:43