Thermex instantaneous electric water heater is designed for providing hot water to
municipal facilities having water mains of the required parameters. The IEWH is to be
used in closed heated premises.
The IEWH degree of protection against intrusion of particulate matters and dust is
IP24.
The ambient temperature for the IEWH operation should lie within the range from +3
С° to +40 С°, the atmospheric humidity should be up to 80% or may rise to 98% for a
short period (while the ambient temperature does not exceed 25 С°). Water freezing in
the IEWH at a negative temperature will lead to its failure which is not covered by the
warranty.
Table 1
Model
Code
Voltage
Frequency
Wattage
Output (∆t=25°C)
Output (∆t=35°C)
Unit sizes
Weight
Box sizes
Gross weight
Recommended cable section
Water connection
Working pressure
Nominal pressure max.
IP rating
Protection class
Water heater
Operation manual
Packaging
Mounting kit
The water in the IEWH heats up instantly, passing through a stainless steel heating
flask in which the heating element is located. The required temperature is achieved by
adjusting the water flow using the handle of the device (by reducing/ increasing the
1.
2.
MAIN TECHNICAL DATA
3.
PACKAGE CONTENTS
4.
PRINCIPLE OF OPERATION
USE
THERMEX Runa 3000
221 010
230 V ~
50 Hz
3000 W
1.7 L/min
1.2 L/min
190 x 90 x 340 mm
0.9 kg
192 x 105 x 240 mm
1.1 kg
1,5 mm²
G 1/2
0.04-0,6 MPa
0.6 MPa
IP24
I
- 1 pc
- 1 pc
- 1 pc
- 1 pc
2