Intex QS500 Bedienungsanleitung Seite 19

(329GS) MODEL ECO5220G & 6220G SALTWATER SYSTEM WITH E.C.O. ENGLISH 7.5" X 10.3" PANTONE 295U 07/03/2024
LED CODE CHART
LED Reading
80
00
01
02
03
04
05
06
07
08
09
10
11
12
90
91
92
93
"BLANK" No Power or "Power Saving Mode" waiting to start next
When Code "90" alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to be
turned on/off manually every day.
SAVE THESE INSTRUCTIONS
Definitions
Boost Mode
Stand-By Mode (Start-up)
Minimum Operating Hour (1 hour remaining)
Operating Hours (2 hours remaining)
Operating Hours (3 hours remaining)
Operating Hours (4 hours remaining)
Operating Hours (5 hours remaining)
Operating Hours (6 hours remaining)
Operating Hours (7 hours remaining)
Operating Hours (8 hours remaining)
Operating Hours (9 hours remaining)
Operating Hours (10 hours remaining)
Operating Hours (11 hours remaining)
Maximum Operating Hours (12 hours remaining)
Alarm Code (Low Pump Flow / No Flow)
Alarm Code (Low Salt Level)
Alarm Code (High Salt Level)
Stand-By Mode (Operating Process finished)
Saltwater System cycle.
IMPORTANT
329
English
GSA
Page 19