Closing The Container; Workflow; Folding And Assembling The Box; Workflow Folding The Box - Genius Flex-Box 240 Basic Bedienungsanleitung

3.5 Closing the container

3.5.1 Workflow

3.6 Folding and assembling the box

3.6.1 Workflow folding the box

Bedienungsanleitung FLEX-Box
GENIUS Technologie GmbH  Willy-Brandt-Straße 9 • 72555 Metzingen / Germany
Telefon: + 49 (0) 3375 - 24 609 80 • Telefax: + 49 (0) 3375 - 24 609 88 • info@genius-group.de • www.genius-group.de
Copyrighted  No duplication without prior approval  PyroBubbles
1. Cover the container with the cover.
Attention
Make sure that the container cover rests firmly on the top edge of the
container and is not tilted.
2. Secure the cover with the locks. Push the locks in as far as they will go.
The tab should protrude completely through the corresponding groove.
3. To tension the lashing strap, press the clamp closure and pull the lashing
strap downwards. Repeat the process with the other three lashing
straps
1. Open the transport container (see 3.3 Opening the transport
container).
Version: 1.0
All rights reserved © GENIUS Technologie GmbH
Seite / page: 35/40
®
is a registered trademark
Datum / date: 09.12.2024