Extinguishing The Flame - Homcom Fd97-90 Bedienungsanleitung

Starting up
● Filling the burner:
● Note: The fuel is not included in the scope of delivery and must be purchase
separately from a DIY store or fuel dealer. Only use the type of fuel as specified by
the manufacturer.
● Before using the burner, carefully check for any leakage. And please contact
the retailer immediately if leakage.
● Use a funnel to fill fuel into burner, Do not exceed the 'MAX' line in the burner.
●
In case of any spilt fuel, it must be immediately cleaned with an absorbent
tissue, then cleaned with water to prevent ignition outside the burner reservoir.
● CAUTION: Spilled fuel may cause staining on flooring.
● Use a long lighter or long match to safely ignite the fuel in the burner. Keep a
horizontal minimum distance of 140mm (5.5 inches) when igniting the fire.
● If the flame does not ignite, repeat the ignition process until the flame burns
steadily.
● The fuel may burn low initially. Allow approximately 15 minutes for the flame to
reach optimum temperature and height.
● ATTENTION: Store the fuel at room temperature to facilitate ignition
● CAUTION: Store the fuel in a fire-safe area, at least one meter (40 inches) away
from the appliance. Do not place fuel in front of appliance.
● Keep your face and body away from the appliance during the ignition process.
REFILL WARNING
● Before refilling the burner, ensure there is no longer any visible flame on the
surface.
● Note: The flame may be difficult to see, so ensure it is fully extinguished.
● WARNING! Never attempt to refill a burner that is still burning. It is crucial to
wait at least 30 minutes for the burner to cool down before refilling it.

EXTINGUISHING THE FLAME

● To extinguish the flame, use the extinguisher tool that is provided in the
package. Keep the fire extinguishing tool at least 140mm (5.5 inches) away from
the flame.
CAUTION: Do not exceed the 'MAX' line when
refueling.
CAUTION: Do not directly touch the surface of the burner
It can be extremely hot.
4