SOUNDMASTER UR200SI Bedienungsanleitung Seite 19

DAYLIGHT SAVING TIME (DST) MODE
If daylight saving time (DST) is available in the summer time in your State, you
may use this option to adjust to the correct time easily.
1. In standby mode, press and hold the unit DST button (3) for 2 seconds to
advance the displayed time by one hour.
2. To cancel DST mode, repeat the above operation.
ALTERNATE DISPLAY BETWEEN TIME AND TEMPERATURE MONTH-DATE
DISPLAY
1. In radio off mode, press and hold the unit button (2) for about 3 seconds until
"ON" appears in the LED DISPLAY.
2. The DISPLAY will alternate between the current Time for 10 seconds and
month- date for 5 seconds and temperature for 5 seconds as follows:
To cancel this function, press and hold the unit button (2) for about 3 seconds
until "OFF" appears on the LED DISPLAY. The DISPLAY will switch back to
normal time display.
NOTE
If you replace the battery, do not disconnect AC plug from AC outlet. Otherwise,
current time and alarm will be initialized.
All manuals and user guides at all-guides.com