VEVOR MHTJXM01F Benutzerhandbuch Seite 17

1.The carbon brush has a relatively large spark and smoke.
2.The contact surface of the carbon brush on the slip ring is less than 70%.
3.Carbon brush spring pressure mismatch, etc.
REPLACE THE CARBON BRUSH STEPS
1.Remove the screws fixing the baffle plate and top cover and take out the
baffle and top cover.
Remove the connecting end of the carbon brush, remove the fixing screws,
and take out the old carbon brush. (In order to facilitate the installation and
disassembly, the fixing screw of the Spinner Head can be removed first to
increase the operating space)
2. Replace the new carbon brush, place it in position and fix it with screws,
and plug in the connecting end.
16