Circuit Diagram - Vevor Mhtjxm01F Benutzerhandbuch

CIRCUIT DIAGRAM

TROUBLESHOOTING
Fault: No Sugar Filament
1. Check whether the Spinner Head is rotating or not, and stop the
machine to sense whether the Spinner Head is hot.
2. If the Spinner Head does not rotate: check whether the machine is
powered on, and whether the motor is broken.
3. If the Spinner Head is not hot: check whether the machine is powered
on, whether the Spinner Head is ringing, and whether the voltage is
excessive.
4. Unscrew the fuse knob on the panel or pry open the fuse cover (for
Countertop Type) in the socket, then, take the fuse out to check whether it
is burnt out.
5. Remove the baffle & upper cover and take out the cover through the
spinning head, then you can see the internal condition of the machine.
Check whether the carbon brush is loose or not working, if so, replace it
with a new one.
NOTICE FOR CARBON BRUSH
Please replace the carbon brush in time if the following situations occur
during routine maintenance inspection and use:
15