Werbung
Prevent environmental damage
• Dispose of the device and its components in accordance with the
regulations applicable at the place of use.
Avoid material damage and malfunctions
Place the device on an easily accessible, level, dry, heat-resistant and
sufficiently stable surface.
Do not place the device at the edge of the surface.
Do not remove the feet.
Do not drop the device.
Do not subject the device to impact loads.
Do not use any bottles other than the Jägermeister 35% vol. bottles
specified in this manual.
Clean the device at least once or twice a month as described in this
manual (see p. 50).
Have the cleaning record signed by the operator or the person cleaning
the machine.
After cleaning, make sure that there is no residual water in the device.
To do this, tilt the unit slightly at the end to remove the remaining liquid.
Do not cover the ventilation opening in the device.
Only use warm water to speed up the defrosting process.
Always switch off the device when it is not in use to save power and
protect the electrical components.
Safety
39
Werbung
