Using The Touchpad - Samsung KE55S9C Schnellanleitung

Using the Touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu
> System > Device Manager > Smart Touch Control Settings > Tutorial) to view an
on-screen guide to using the Smart Touch Control.
Dragging
Drag on the touchpad in the desired direction.
Move the focus or the pointer in the direction the finger
is dragging.
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left
or right edge of the touchpad to bring up the numerical
input window on the screen. Use your finger to enter
the number for the channel you want to watch. The
recognised number is displayed on the screen and the TV
switches to the corresponding channel. See the e-Manual
chapter, Controlling TV > Touchpad.
[S9C-ZG]BN68-05491D-01L04.indb 7
Press
Press on the touchpad. This selects the focused item.
When watching TV, pressing and holding the touchpad
displays the channel list. On some apps, pressing and
holding the touchpad for over 2 seconds displays a list of
functions available for the app.
English - 7
Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not
recognise your entries if you do not follow the sequences shown below.
Show Status and Notification Banner
Press the MORE button on the Smart Touch Control and then select STATUS on
the virtual remote panel to display the status and notification banner at the top of the
screen.
Recommendations
Press the RECOMM. / SEARCH button and then select Recommended from the list
displayed at the bottom of the screen. Select a programme that is currently airing to
jump to the corresponding channel or a programme that is scheduled to air to set up
a Schedule Viewing or Schedule Recording setting. Select an application to launch.
Samsung Apps will launch if the selected application is not installed on the TV.
2013-10-31 11:16:17