Connecting To A Network - Samsung KE55S9C Schnellanleitung

Network Configuration

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the
Smart Hub, as well as software updates.
Network Connection - Wireless
Connect the TV to the Internet using a standard router or modem.
Wireless Network Precautions
• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols.
Samsung recommends using IEEE 802.11n. Otherwise when you play video over a
network connection, the video may not play smoothly.
[S9C-ZG]BN68-05491D-01L04.indb 16
The LAN Port
on the Wall
Wireless IP Router or Modem
that has a DHCP Server
LAN Cable (Not Supplied)
English - 16
• To use a wireless network, the TV must be connected to a wireless router or
modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP
address to connect to the wireless network.
• Select a channel that is not currently in use for the wireless router. If the channel set
for the wireless router is currently being used by another device, the result is usually
interference and/or a communications failure.
• Most wireless networks have an optional security system. To enable a wireless
network's security system, you need to create a security key using characters and
numbers. This security key is then needed to connect to the wireless network.
Network Security Protocols
The TV only supports the following wireless network security protocols and is unable to
connect to non-certified wireless routers:
• Authentication Modes: WEP, WPAPSK, WPA2PSK
• Encryption Types: WEP, TKIP, AES
If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode
and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the
connection in compliance with the new Wi-Fi certification specifications.
If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect
to the network using PBC (Push Button Configuration) or a PIN (Personal Identification
Number). WPS automatically configures the SSID and WPA key settings.
2013-10-31 11:16:20