Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
✎
Turn the TV off to connect or disconnect a CI card or CI card adapter.
Attaching the CI Card Adapter
Attach the adapter as shown side.
To install the CI CARD Adapter, please remove the sticker attached to the TV.
✎
To connect the CI CARD Adapter, follow these steps.
We recommend attaching the adapter before installing the wall mount, or inserting
✎
the "CI or CI+ CARD".
1. Insert the CI CARD Adapter into the two holes on the product 1.
Please find two holes on the rear of the TV, beside the
✎
INTERFACE
port.
2. Connect the CI CARD Adapter into the
product 2.
3. Insert the "CI or CI+ CARD".
[S9C-ZG]BN68-05491D-01L04.indb 14
TV Rear
COMMON
COMMON INTERFACE
port on the
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
• If you don't insert the "CI or CI+ CARD", some channels will display the message
"Scrambled Signal".
• The pairing information containing a telephone number, the "CI or CI+ CARD" ID
the Host ID and other information will be displayed in about 2~3 minutes. If an error
message is displayed, please contact your service provider.
• When the configuration of channel information has finished, the message "Updating
Completed" is displayed, indicating the channel list is updated.
NOTE
✎
• You must obtain a "CI or CI+ CARD" from a local cable service provider.
• When removing the "CI or CI+ CARD", carefully pull it out with your hands since
dropping the "CI or CI+ CARD" may cause damage to it.
• Insert the "CI or CI+ CARD" in the direction marked on the card.
• The location of the COMMON INTERFACE slot may be different depending on
the model.
• "CI or CI+ CARD" is not supported in some countries and regions; check with
your authorized dealer.
• If you have any problems, please contact a service provider.
• Insert the "CI or CI+ CARD" that supports the current aerial settings. The
screen will be distorted or will not be seen.
English - 14
2013-10-31
11:16:19