VEVOR GX-04-100 Benutzerhandbuch Seite 22

probe's reading falls below the trigger or if any button is pressed. You can
also set the alarm OFF by holding the up and down buttons simultaneously
for more than 5 seconds.
You may set this alarm below the low humidity trigger to create an
operating range.
Note that alarm triggers can only activate in AUTO, ON, or TIMER Mode.
Please leave ALARM SETTING to arm the controller.
ALARM SETTING: LOW HUMIDITY
In this mode, press the up and down button simultaneously for more than 5
seconds sets a low humidity alarm. The alarm will sound and its icon will
flash if the probe's reading falls below the set humidity.
To activate the alarm, leave the alarm mode. The alarm will turn OFF if the
probe's reading rises above the trigger or if any button is pressed. You can
also set the alarm OFF by holding the up and down buttons simultaneously
for more than 5 seconds.
You may set this alarm above the high humidity trigger to create an
operating range.
- 21 -