First Use - JUNO Electrolux JRG 90106 Benutzerinformation

ACTUAL temperature means:
The temperature indicator shows the cur-
rent temperature inside the fridge. The AC-
TUAL temperature is indicated with illumi-
nated numbers.
TEMPERATURE INDICATOR
The temperature indicator shows several in-
formation:
• During normal operation, the temperature
currently present in the fridge (ACTUAL
temperature) is displayed.
• When the temperature is being adjusted
a flashing display indicates the fridge
temperature currently set (DESIRED tem-
perature).
When changing the temperature setting
wait about 24 hours until the temperature
display has stabilised.
TEMPERATURE REGULATION
To operate the appliance, proceed as fol-
lows:
1. Set the required temperature by press-
ing the corresponding temperature reg-
ulator. The temperature indicator will
immediately show the changed setting
(DESIRED temperature) and the tem-
perature indicator flashes.
2. Each time the temperature regulator is
pressed the DESIRED temperature is
adjusted by 1 °C. The DESIRED tem-
perature must be reached within 24
hours.
3. Once the required temperature has
been set, after a short period (approx.
5 sec.) the temperature indicator will
show again the current ACTUAL tem-
perature inside the corresponding com-
partment. The temperature indicator
will change from flashing to continuous
illumination.
For a correct storage of the food the follow-
ing temperature should be set:
• +5 °C in the fridge

FIRST USE

CLEANING THE INTERIOR
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
Important! When the setting is changed,
the compressor does not start immediately
if automatic defrosting is currently taking
place. As the storage temperature within
the fridge is reached quickly you can store
food immediately after switching on.
SCHNELLKÜHLEN FUNCTION
The Schnellkühlen function is suited for
quick cooling of large quantities of goods in
the refrigerator.
To activate the function, do these steps:
1. Press the Schnellkühlen button.
2. The Schnellkühlen indicator switches
on.
The Schnellkühlen function now provides
for intensive cooling. A temperature of +3°C
is automatically selected.
The Schnellkühlen function is ended auto-
matically after a period of 6 hours.
You can deactivate the function at any time:
1. Press the Schnellkühlen button.
2. The Schnellkühlen indicator switches
off.
HOLIDAY FUNCTION
This function allows you to keep the refrig-
erator shut and empty during a long holiday
period (e.g. the summer holidays) without
the formation of a bad smell.
Important! The fridge compartment must
be empty when the holiday function is on.
To activate the function, do this step:
1. press continuously the temperature
regulator (warmest) until the letter "H"
(Holiday) appears on the temperature
indicator. The Holiday function sets the
temperature approx +15°C. The refrig-
erator is in the energy-saving mode.
To deactivate the function, do this step:
1. set the required temperature by press-
ing the fridge temperature regulator.
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
electrolux 5