Bailey RoBust LED Rope Roll2Go 10M Anleitung

RoBust LED Rope Roll2Go 10M
INSTALLATION MANUAL | HANDLEIDING | ANLEITUNG | MANUEL
Bailey Electric & Electronics bv - Everdenberg 21 - 4902TT Oosterhout - The Netherlands - +31 (0)162 52 2446 - www.bailey.nl
EN - INSTRUCTIONS
Before installation please read the specifications to make sure
that this product is suitable for the operating environment.
Technical specifications
Input voltage
IP rating
Operating temperature range
1. Before use: pull out the LED Rope from the roller.
2. Make sure to pull out the entire LED Rope from the roll
before connecting power.
3. After use, let the LED Rope cool down before rolling it back
up in the cassette. The Rope expands and this can damage
the turning mechanism.
4. It is not possible to shorten and/or extend the LED rope.
Warnings - Safety - Caution
• Risk of electric shock. Disconnect power before installation,
servicing and removal.
• Make sure the supply voltage is the same as the rated lamp
voltage.
• All safety instruction must be followed to avoid a risk of injury
or property damage.
• Suitable for indoor and outdoor use.
• Not suitable for use in extreme conditions or locations
involving harmful substances.
• Do not cut the LED rope and fixed power cable.
• Do not heavy press or overbend during installation and
mounting should be firm, not hanging.
• Do not use iron wire or other metallic wire to fasten.
• Do not cover the product. Do not attach other items to the
product. Store and install the product out of the reach of
children. Only use the product when it is working perfectly.
• Do not touch the product in the event of a fault or
breakdown. Immediately switch off the product and
disconnect the power supply.
• The following situations are meant by fault or breakdown:
there is visible damage to the product, the product is not
working perfectly (e.g. it is flickering), there is a burning
smell, the results of overheating are visible.
• Testing and small repairs must be carried out by a qualified
electrician.
Maintenance
In order not to adversely affect the service life, it is advisable to
clean the fixture on a regular basis. Only use a soft cloth and
water. Avoid exposure to volatile chemical substances such as
alcohol, petrol or pesticides.
Disposal
Electrical products may not be disposed of in the same way as
normal household waste. Take the table lamp to a place where
it can be recycled. Consult the local authorities or the seller for
advice about collection and processing.
Warranty
The warranty period will begin on the day on which the product
was purchased from Bailey and will end after 2 years. If a defect
occurs within the warranty period as a consequence of material
faults and/or manufacturing errors, Bailey will replace the
product. The warranty does not cover consequential damage,
nor will any call-out charges, transport costs or installation costs
be reimbursed. The warranty does not apply if:
• There is no information, or there are no documents, referring
to the date of purchase (invoice or delivery note).
• The model and/or serial number located on the product is
unrecognizable (include photo of product sticker or imprint
with specifications).
• The defect was caused by improper use of the product or
use not as intended, or by use in extreme conditions or in
conditions involving harmful substances.
• Damage to the product was caused by external factors.
• The product is modified.
AC 220-240V
IP65
-20~45°C