Robust LED Compact Inspect 15W 6500K 1500lm + 300lm
INSTALLATION MANUAL | HANDLEIDING | ANLEITUNG | MANUEL
EN - MANUAL
Before installation please read the specifications to make sure
that this product is suitable for the operating environment.
A.
Main LED light
B.
Torch LED light, 300mm flexible and bendable
C.
USB-C charging socket witch cover cap
D.
Battery status indicator
E.
Rotating (360°) hanging hook
F.
On/Off switch
G.
Magnet
Technical specifications
Battery
3.7V 4400mAh Lithium
Charging time
4 hours
Operating time
100%: 3h
50%: 6h
25%: 12h
USB-C charging cable
1m (included)
Charging input
5V 2A
IP rating
IP54
Impact strength
IK08
Protection class
CLIII
Ambient temperature
-10~40°C
Charging
•
Connect the USB cable to power bank, computer or
adapter for charging.
•
Fully charge before first use and use the included USB-C
cable.
•
When charging, the indicator lights are blinking. All 4
LEDs are green once fully charged.
Press ON-OFF switch
1.
Torch ON
2.
Main light 25%
3.
Main light 50%
4.
Main light 100%
5.
OFF
If in any mode for over 5 seconds, the next press will turn off the
light.
Bailey Electric & Electronics bv - Everdenberg 21 - 4902TT Oosterhout - The Netherlands - +31 (0)162 52 2446 - www.bailey.nl
Warnings
•
Suitable for indoor and outdoor use.
•
Not suitable for use in extreme conditions (high
temperatures and water).
•
LED light source is not replaceable.
•
Only charge the lamp in dry indoor location.
•
Do not turn on the light when charging.
•
Do not use a modified or damaged charger.
•
Do not overcharge the lamp. Pull the power plug if
nobody is around for a longer period.
•
Recharge the lamp at least once every 3 months to
prolong battery life.
•
Only use certified USB adapters for charging (output 5V).
•
Do not disassemble the lamp and do not replace the
batteries.
•
Do not use the lamp in immediate vicinity of inflammable
materials or gases.
•
Do not cover the product.
•
Do not point the light directly in eyes.
•
This device utilizes a rechargeable Lithium battery that
can rupture, ignite and cause serious injury if being used
improperly.
Maintenance
In order not to adversely affect the service life, it is advisable to
clean the fixture on a regular basis. Only use a soft cloth and
water. Avoid exposure to volatile chemical substances such as
alcohol, petrol or pesticides.
Disposal
Electrical products may not be disposed of in the same way as
normal household waste. Take the table lamp to a place where
it can be recycled. Consult the local authorities or the seller for
advice about collection and processing.
Warranty
The warranty period will begin on the day on which the product
was purchased from Bailey and will end after 2 years. If a defect
occurs within the warranty period as a consequence of material
faults and/or manufacturing errors, Bailey will replace the
product. The warranty does not cover consequential damage,
nor will any call-out charges, transport costs or installation costs
be reimbursed. The warranty does not apply if:
•
There is no information, or there are no documents,
referring to the date of purchase (invoice or delivery
note).
•
The model and/or serial number located on the product is
unrecognizable (include photo of product sticker or
imprint with specifications).
•
The defect was caused by improper use of the product or
use not as intended, or by use in extreme conditions or in
conditions involving harmful substances.
•
Damage to the product was caused by external factors.
•
The fixture is modified.
NL - HANDLEIDING
Lees voor installatie de specificaties om te controleren of het
product geschikt is voor gebruik in de huidige situatie.
A.
Hoofd LED-licht
B.
Zaklamp LED, 300mm flexibel en buigbaar
C.
USB-C-oplaadaansluiting met afdekkap
D.
Batterijstatusindicator
E.
Draaibare (360°) ophanghaak
F.
Aan/uit- schakelaar
G.
Magneet