Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE:
The system may only be used for the purpose
that it is intended for. When disregarding, dam-
age to property and personal injury cannot be
excluded. Any and all warranty, guarantee and
responsibility on behalf of the manufacturer
shall expire.
NOTE:
The system may only be operated in enclosed
rooms.
NOTE:
Possible damage due to insufficient load-bearing
capacity of the floor.
The set-up location and the surrounding paths
must be able to withstand the weight of the sys-
tem.
▷ Observe weight of system.
▷ Inform yourself about the building conditions
at the responsible authority (e.g. archi-
tect/structural engineer).
NOTE:
Possible machine damage through insufficient
extraction during dry processing!
▷ Operate the machine only with the extraction
system recommended by the manufacturer or
another compatible extraction system.
S A F E T Y I N S T R U C T I O N S
NOTE:
Possible machine damage due to insufficient or
incorrect compressed-air supply!
▷ Operate the machine with the required pres-
sure, air volume and air quality (see Technical
Data).
NOTE:
Switch the machine off when not in use or unsu-
pervised for longer periods, e.g., overnight. This
method of saving electrical energy also benefits
the environment.
2.2
Unsupervised operation
NOTE:
The machine may be operated with no supervi-
sion, provided that the national and local laws
and regulations permit this and that these are
complied with. Exception: Machining of titanium
blanks (see section 2.3). Furthermore, the
requirements of the respective insurance com-
pany must be met.
The following conditions must be met to ensure
unsupervised operation:
▷ Do not use the machine with a heavily contam-
inated milling chamber.
▷ Protect the machine against interference by
unauthorized persons.
▷ Ensure that the room in which the machine is
being operated has an automatic fire alarm
system.
E N
23
Werbung
