TFA 38.2024 Bedienungsanleitung Seite 13

TFA_No. 38.2024_Anleitung
Digital timer
• Place the battery compartment lid on the housing and slide it
upwards.
• All LCD segments will light up for about a few seconds
• The unit is ready for use.
• Take out the batteries to shut down the instrument.
7. Operation
7.1 Timer
• Push the MIN button to set the minutes and the SEC button to set the
seconds of the desired time. Press and hold the buttons in setting
mode for fast running.
• ▼ appears on the display.
• Push the S/S button to start the countdown process.
• During the countdown, the symbol is flashing and the S/S button
flashes in green.
24
03.07.2011 11:59 Uhr Seite 13
Digital timer
• Use the S/S button to stop and restart the counting.
• After the countdown the symbol ▲ appears in the display, the alarm
(60 seconds) will sound and the S/S button flashes in red. Now the
timer will start to count up the elapsed time.
• Press the S/S button to stop the counting and to deactivate the alarm
sound.
• The timer will recall the last selected time automatically.
• Push the MIN and SEC button at the same time to reset the timer.
7.2 Memory function
• Press and hold M1 button for 2 seconds.
• 00:00 flashes on the display.
• Push the MIN button to set the minutes and the SEC button to set the
seconds of the desired time.
• Confirm the setting with the M1 button.
25