Anest Iwata Silver Jet IS50AU Bedienungsanleitung Seite 5

Unpack the compressor and all components:
- Iwata Silver Jet Airbrush Compressor (IS50, IS51, IS50AU/SH, IS50DE, IS50DES1, IS50SA)
- Iwata Cobra Coil Air Hose (CTI10)
- Air Hose Adapters for use with Badger, Aztec
and Paasche Airbrushes (J003)
- Operating Instruction Manual
- International adapters (IS50SA Only)
VOLTAGE CAUTION
- READ CAREFULLY -
If you bought the compressor
in the country you're going to
use it, it's completely ready to
go. If you're going to transfer
the compressor to another
country with a different
voltage, you'll need a plug
adapter and the appropriate
power converter, though this
is not recommended.
WARNING: Using a plug
adapter and power
converter may cause unit
to overheat. Any issues
resulting from the use of
a power adapter and/or
power converter are not
covered under the ANEST
Iwata-Medea warranty.
ASSEMBLY INSTRUCTIONS
Handle
Part
Item ID
Number
1 CTI10
2 ISFT1
5
1
Air Outlet, 1/4" - IS50
Air Outlet, 1/8" - IS51, IS50DES1
Air Pressure Gauge
Airbrush Holder
Air Bleed Valve Knob
Electrical Cord Wrap
2
Description
10ft Iwata Coil Hose
Comp Foot
International Plugs
IS50SA ONLY
On/Off Switch
DO NOT USE OIL
IN OR ON THE
COMPRESSOR