Meross MTS200HK Benutzerhandbuch Seite 9

2. Set up the device.
(1) Connect your smartphone or tablet to a
2.4 GHz Wi-Fi network.
(2) Make sure your smart device is covered by
strong Wi-Fi signal.*
(3) The smart device supports iOS 13/ iPadOS
13 and later. It is recommended that you
upgrade your iOS or iPadOS to the latest
version before pairing with the smart device.
(4) Launch the Meross app and log in to your
account, or if you are a new user, tap Sign
up to create a new account.
(5) Tap the "+" icon to select the type of smart
device you want to add, then you can
just follow the setup wizard to finish
configuration.
* MTS200 only supports 2.4GHz Wi-Fi network.
Note:
(1) If this is not the first time you've added
this smart device, you'll have to reset it
before going any further—press and
7