Levoit Classic Pro Bedienungsanleitung Seite 9

G E T T I N G S TA R T E D
WARNING: Do not use the fan before
finishing assembly.
1. Remove all packaging.
2. Snap the two pieces of the base together.
[Figure 2.1]
3. Unscrew the plastic nut from underneath
the tower fan. [Figure 2.2]
4. Secure the base to the tower fan with the
plastic nut. [Figure 2.3]
Note: If the tower fan is unstable, firmly tighten the
plastic nut.
5. Place the tower fan on a flat, stable surface
such as the floor.
6. Insert the power adapter into the port,
located at the bottom of the tower fan.
Plug in and turn on. [Figure 2.4]
7. When using the tower fan, allow at least 15
inches / 38 cm of clearance from the front
of the tower fan. Keep away from anything
that would block airflow, such as curtains.
[Figure 2.5]
VeSync App Setup
Note:
• The VeSync app is continually being improved
and may change over time. If there are any
differences, follow the in-app instructions.
• Requires device to run app, Wi-Fi or mobile
data, and iOS version 12 or Android version 6
(or above). Standard data and messaging rates
may apply. Registration is required.
To download the VeSync app, scan the
1.
QR code or search "VeSync" in the Apple
App Store® or Google Play Store.
Note: For Android™ users, choose "Allow" to
use VeSync.
Open the VeSync app.
2.
Up.
Note: You must create your own VeSync
account to use third-party services and
products. These will not work with a guest
account. With a VeSync account, you can
also allow your family and friends to control
your smart tower fan.
Follow the in-app instructions to set up
3.
your smart tower fan.
Note: Your phone must have Location
turned on while your phone is connecting to
your smart tower fan. This is required to
establish the Bluetooth® connection. You
can turn Location off after your smart
tower fan is finished connecting to
the VeSync app.
Wi-Fi® Connection
• To disconnect Wi-Fi, press and hold
for 15 seconds until the Wi-Fi indicator
turns off. This will restore the smart tower
fan's default settings and disconnect it
from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for adding
a device.
Connect with Amazon Alexa or
Google Assistant™
You can use the VeSync app to connect
your smart tower fan to Amazon Alexa or
Google Assistant™. Please follow the in-app
instructions to set up your voice assistant.
Note:
• You must create your own VeSync account to
access voice assistants.
• A list of voice commands is available under
settings in the VeSync app.
Log In or Sign
EN
9